Description

Work near overhead power lines puts an electrical hazard on the risk assessment, and an ordinary work glove does nothing about it. The Tilsatec Pulse® Class 2 gloves are electrical insulating gloves with a maximum use voltage of 17,000V AC, certified to both EN 60903 and ASTM D120.

They are 100% natural rubber latex and 36cm (14 inches) long. Shaped fingers help you keep grip and control, and the smooth finish makes them easier to pull on and off at the end of a job.

Class 2: maximum use voltage 17,000V AC
Dual certified: EN 60903 and ASTM D120
Natural rubber latex, black with a red edge at the cuff
Sizes 8 to 11, sold as one pair

Insulating gloves stop current passing through your hands if you touch something live, up to their 17,000V AC rating. They do not make it safe to work closer to a line than your risk assessment allows, so plan the job and keep your clearance. For your feet, the Skellerup Quatro Dielectric Thermal Safety Boots are Class 2 as well. Not sure they are right for your work? Talk to our team before you order.

Product Specifications

Brand: Tilsatec Pulse®
Manufacturer code: 24-2024
Class: 2
Maximum use voltage: 17,000V AC
Standards: EN 60903, IEC 60903 and ASTM D120
Category: R/C (acid, ozone and oil resistant, for extreme low temperatures)
Arc rating: APC 2, ATPV 21.0 cal/cm²
Material: 100% natural high grade rubber latex, silicone free
Length: 36cm (14 inches)
Cuff: Straight, with a rolled edge
Colour: Black, red cuff edge
Sizes: 8, 9, 10, 11
Supplied as: 1 pair, in a sealed polybag and its own box

Spec sheet and instructions for use (PDF)

Delivery & Returns

Mainland UK: you should receive your order in 2 to 3 working days.

Free delivery: orders over £75 ex VAT qualify for free courier delivery.
Smaller items: sent via Royal Mail Tracked 48, 3 to 5 working days.
Oversized items: delivered by pallet within 2 to 4 working days; a signature is needed on delivery.
Returns: free 30 day returns. The returns policy has the details, and you can start a return through the DPD returns portal.
Same day dispatch available: orders placed before 3pm, Monday to Friday, are dispatched the same day at an additional cost. Select same day despatch at checkout.

Delivery times are not guaranteed, and Window Cleaning Warehouse cannot accept liability for items delivered to third party or unsecured addresses.

Safety

Assess the risks before every job and follow your safety procedures. These gloves do not replace keeping a safe distance from overhead power lines.

Before every use: blow air into each glove to check for leaks, and look them over inside and out. If either glove leaks or shows any wear or damage, do not use the pair.

Testing: Class 2 gloves must be dielectric tested every 6 months from first use, and must not be used if they have not been tested within the previous 12 months.

Storage: keep them in their packaging between 10°C and 35°C, away from moisture, sunlight, heat and sharp objects, and do not fold or crush them.

Care: keep them away from oil, grease, white spirit, turpentine and strong acids. They contain natural rubber latex, which may cause an allergic reaction.

Spec sheet and instructions for use (PDF)

Guidance for window cleaners and overhead power lines (PDF)

CODE: TILSATEC-PULSE-GLOVES-SIZE-8

Tilsatec Pulse^® Class 2 Electrical Insulating Gloves

£88.00

£105.60

Class 2 electrical insulating gloves with a maximum use voltage of 17,000V AC. Natural rubber latex, 36cm long, in sizes 8 to 11.

Usually delivered in 2 to 3 working days

Size

8 9 10 11

Need dielectric boots?

Skellerup Quatro Dielectric Thermal Safety Boots

£119.00

£142.80

Choose option

Description

They are 100% natural rubber latex and 36cm (14 inches) long. Shaped fingers help you keep grip and control, and the smooth finish makes them easier to pull on and off at the end of a job.

Class 2: maximum use voltage 17,000V AC
Dual certified: EN 60903 and ASTM D120
Natural rubber latex, black with a red edge at the cuff
Sizes 8 to 11, sold as one pair

Product Specifications

Brand: Tilsatec Pulse®
Manufacturer code: 24-2024
Class: 2
Maximum use voltage: 17,000V AC
Standards: EN 60903, IEC 60903 and ASTM D120
Category: R/C (acid, ozone and oil resistant, for extreme low temperatures)
Arc rating: APC 2, ATPV 21.0 cal/cm²
Material: 100% natural high grade rubber latex, silicone free
Length: 36cm (14 inches)
Cuff: Straight, with a rolled edge
Colour: Black, red cuff edge
Sizes: 8, 9, 10, 11
Supplied as: 1 pair, in a sealed polybag and its own box

Spec sheet and instructions for use (PDF)

Delivery & Returns

Mainland UK: you should receive your order in 2 to 3 working days.

Free delivery: orders over £75 ex VAT qualify for free courier delivery.
Smaller items: sent via Royal Mail Tracked 48, 3 to 5 working days.
Oversized items: delivered by pallet within 2 to 4 working days; a signature is needed on delivery.
Returns: free 30 day returns. The returns policy has the details, and you can start a return through the DPD returns portal.
Same day dispatch available: orders placed before 3pm, Monday to Friday, are dispatched the same day at an additional cost. Select same day despatch at checkout.

Delivery times are not guaranteed, and Window Cleaning Warehouse cannot accept liability for items delivered to third party or unsecured addresses.

Safety

Assess the risks before every job and follow your safety procedures. These gloves do not replace keeping a safe distance from overhead power lines.

Before every use: blow air into each glove to check for leaks, and look them over inside and out. If either glove leaks or shows any wear or damage, do not use the pair.

Testing: Class 2 gloves must be dielectric tested every 6 months from first use, and must not be used if they have not been tested within the previous 12 months.

Storage: keep them in their packaging between 10°C and 35°C, away from moisture, sunlight, heat and sharp objects, and do not fold or crush them.

Care: keep them away from oil, grease, white spirit, turpentine and strong acids. They contain natural rubber latex, which may cause an allergic reaction.

Spec sheet and instructions for use (PDF)

Guidance for window cleaners and overhead power lines (PDF)

Tilsatec Pulse® Class 2 Electrical Insulating Gloves Personal Protection

Rated to 17,000V AC

Class 2 insulating gloves certified to EN 60903 and ASTM D120, for jobs where an electrical hazard is on the risk assessment.

Natural rubber that keeps your grip

Flexible natural rubber latex and shaped fingers help keep grip and control, and the smooth finish makes them easier to pull off.

What does Class 2 mean on electrical insulating gloves?

Class 2 is the rating for insulating gloves with a maximum use voltage of 17,000V AC. The classes run from 00, the lowest, up to 4, and the class tells you the highest voltage the glove is rated to be used at. These Pulse gloves carry the Class 2 rating under both EN 60903 and the American standard ASTM D120. Your risk assessment should set the class you need, so check it before you order.

Do these gloves make it safe to work near overhead power lines?

No glove does that on its own. Insulating gloves stop current passing through your hands up to their 17,000V AC rating, but they do not make it safe to work closer to a line than your risk assessment allows. Plan the job first, keep your clearance, and read our guidance for window cleaners and overhead power lines before working anywhere near a line.

What sizes are the gloves available in?

Sizes 8, 9, 10 and 11, each sold as one pair. These are standard glove sizes, so as a rough guide, measure your working hand:

Size 8: 203mm around the hand, 182mm long
Size 9: 229mm around the hand, 192mm long
Size 10: 254mm around the hand, 204mm long
Size 11: 279mm around the hand, 215mm long

Measure around the palm at the knuckles, thumb not included, and from the crease of the wrist to the tip of the middle finger. If you are still not sure, talk to our team before you order.

What are Tilsatec Pulse gloves made from?

They are 100% natural high grade rubber latex, with shaped fingers and a smooth finish. The rubber stays flexible enough to keep grip and control, and the smooth finish makes the gloves easier to pull on and off. Because they are natural rubber latex, check before use if you have a latex allergy.

How long are the gloves?

They are 36cm (14 inches) long, in black with a red edge at the cuff.

Do electrical insulating gloves need testing?

Yes. Class 2 gloves must be dielectric tested every 6 months from first use, and should not be used if they have not been tested within the previous 12 months. On top of that, check them yourself before every use: blow air into each glove to find any leaks, then look them over inside and out. If either glove fails, take the pair out of use. The full instructions are in the Tilsatec spec sheet.

Quantity	Additional Discount
29+	10%
39+	20%

Your cart

Description

Product Specifications

Delivery & Returns

Safety

Tilsatec Pulse^® Class 2 Electrical Insulating Gloves

Size

Promo Available

Promo Available

Need dielectric boots?

Skellerup Quatro Dielectric Thermal Safety Boots

Description

Product Specifications

Delivery & Returns

Safety