Free Delivery

On Orders Over £75 + VAT

Free DPD Returns

Easy Returns Process

Same Day Despatch

Available until 3pm

Need Help?

Get in touch

  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories
  • Chemical Application Nozzle Brush Accessories

Description

This chemical application nozzle allows you to safely and easily spray chemicals onto windows, uPVC surrounds and conservatory roofs. Ideal for pre treating any surfaces with stubborn build ups of algae, grease or traffic film.

Designed to fit onto standard water fed pole angle necks or any Euro Thread (22mm). This nozzle simply screws onto the top of your pole, and connects to 5mm pole hose.

  • Available as a pack of two with a choice of fan or cone nozzles
  • Fits any pole or angle adapter with a standard Euro Thread
  • Connects to 5mm pole hose
  • Works with these preferred chemicals: FaceLift® RazrWash, V-TUF Heavy Duty TFR and V-TUF D-Green
  • Please note: this application nozzle does not dose, mix or dilute chemicals in any way, this will need to be done beforehand

Chemical use and dilution. Never run chemicals neat through this nozzle or the pole and pump feeding it. Dilute to the chemical manufacturer's stated ratio, and rinse through with clean water after every use. Sodium hypochlorite is suitable below 10%, mixed as the manufacturer directs. Undiluted acids, acid based products, concentrated alkalis and petroleum based products are not suitable and can damage it. Anything outside that is used at your own discretion and may void the warranty. Full guidance is in the Safety tab.

Delivery & Returns

Mainland UK: shipped via DPD next day service.

  • Free delivery: orders over £75 ex VAT qualify for free courier delivery.
  • Smaller items: sent via Royal Mail Tracked 48, 3 to 5 working days.
  • Oversized items: delivered by pallet within 2 to 4 working days; a signature is needed on delivery.
  • Returns: free 30 day returns. The returns policy has the details, and you can start a return through the DPD returns portal.
  • Same day dispatch available: orders placed before 3pm, Monday to Friday, are dispatched the same day at an additional cost. Select same day despatch at checkout.

Delivery times are not guaranteed, and Window Cleaning Warehouse cannot accept liability for items delivered to third party or unsecured addresses.

Safety

Download the Softwashing Guidelines

Never run chemicals neat. Dilute to the chemical manufacturer’s stated ratio before use, and rinse the nozzle, pole and pump through with clean water afterwards.

  • Tested suitable: our own softwashing products, and sodium hypochlorite below 10% mixed as the manufacturer directs.
  • Not suitable: undiluted acids, acid based formulations, concentrated alkalis, alkaline solutions above a 10% dilution, and petroleum based products.
  • Rinse through with clean water after every use. Chemical left standing inside is the most common cause of failure.
  • Anything outside that is used at your own discretion and may void the warranty.
  • Wear the PPE the chemical’s safety data sheet requires, and carry out a site risk assessment before every job. The guide above covers wind, temperature and drainage.

CODE: FL-APP-FF

Chemical Application Nozzle

£29.87

£35.84

Was £36.80

Save £6.93

£29.87

Promo Available

Add To Cart To Unlock Free Shipping

Promo Available

Add To Cart To Unlock Free Shipping

Description

This chemical application nozzle allows you to safely and easily spray chemicals onto windows, uPVC surrounds and conservatory roofs. Ideal for pre treating any surfaces with stubborn build ups of algae, grease or traffic film.

Designed to fit onto standard water fed pole angle necks or any Euro Thread (22mm). This nozzle simply screws onto the top of your pole, and connects to 5mm pole hose.

  • Available as a pack of two with a choice of fan or cone nozzles
  • Fits any pole or angle adapter with a standard Euro Thread
  • Connects to 5mm pole hose
  • Works with these preferred chemicals: FaceLift® RazrWash, V-TUF Heavy Duty TFR and V-TUF D-Green
  • Please note: this application nozzle does not dose, mix or dilute chemicals in any way, this will need to be done beforehand

Chemical use and dilution. Never run chemicals neat through this nozzle or the pole and pump feeding it. Dilute to the chemical manufacturer's stated ratio, and rinse through with clean water after every use. Sodium hypochlorite is suitable below 10%, mixed as the manufacturer directs. Undiluted acids, acid based products, concentrated alkalis and petroleum based products are not suitable and can damage it. Anything outside that is used at your own discretion and may void the warranty. Full guidance is in the Safety tab.

Delivery & Returns

Mainland UK: shipped via DPD next day service.

  • Free delivery: orders over £75 ex VAT qualify for free courier delivery.
  • Smaller items: sent via Royal Mail Tracked 48, 3 to 5 working days.
  • Oversized items: delivered by pallet within 2 to 4 working days; a signature is needed on delivery.
  • Returns: free 30 day returns. The returns policy has the details, and you can start a return through the DPD returns portal.
  • Same day dispatch available: orders placed before 3pm, Monday to Friday, are dispatched the same day at an additional cost. Select same day despatch at checkout.

Delivery times are not guaranteed, and Window Cleaning Warehouse cannot accept liability for items delivered to third party or unsecured addresses.

Safety

Download the Softwashing Guidelines

Never run chemicals neat. Dilute to the chemical manufacturer’s stated ratio before use, and rinse the nozzle, pole and pump through with clean water afterwards.

  • Tested suitable: our own softwashing products, and sodium hypochlorite below 10% mixed as the manufacturer directs.
  • Not suitable: undiluted acids, acid based formulations, concentrated alkalis, alkaline solutions above a 10% dilution, and petroleum based products.
  • Rinse through with clean water after every use. Chemical left standing inside is the most common cause of failure.
  • Anything outside that is used at your own discretion and may void the warranty.
  • Wear the PPE the chemical’s safety data sheet requires, and carry out a site risk assessment before every job. The guide above covers wind, temperature and drainage.