• FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles
  • FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles
  • FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles
  • FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles
  • FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles
  • FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles
  • FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles
  • FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles
  • FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles
  • FaceLift® Horizon Carbon Water Fed Pole Water Fed Poles

Description

New from FaceLift®

The FaceLift® Horizon Carbon is a budget friendly carbon fibre water fed pole. It keeps rolled carbon fibre sections in Phantom diameters and uses simpler Orbital style lever clamps, which is where the saving comes from.

Carbon fibre sections. Rolled carbon fibre sealed in epoxy resin. The pole stays stiff at reach and light in the hand.

Clamps that stay seated. Each clamp sits on a lip and groove at the top of its section, and a notch stops it turning while you work. A clamp that cannot twist does not wear the carbon underneath it.

Replaceable grip shims. The clamps have hooked levers, a polyamide body and spring loaded shims on the cam. The grip shims are softer than the epoxy on the sections, so the shim wears and the pole does not. When they are worn, you replace the shims.

Insulated base section. The base section is glass fibre and Kevlar, dielectric tested to 30 kV AC under IEEE 516-2021. Every production batch is tested in house and verified by a third party. It is an emergency secondary defence only. Never use any pole near overhead power lines.

Each pole comes with a threaded insert in the top clamp, which takes your angle neck and brush, and a base cap. Pole pipe, brush head and hose connector are sold separately, and you can add them from the options on this page.

The Horizon Carbon comes in 18ft, 22ft, 25ft and 30ft, for window cleaning and valeting with pure water. If the budget is tighter, the FaceLift® Horizon Hybrid has the same clamps and base section with glass fibre and carbon hybrid sections.

Product Specifications

  • Extended lengths: 18ft, 22ft, 25ft, 30ft
  • 18ft: 150.6 cm / 4.94ft closed, 4 sections, 1044 g
  • 22ft: 153.3 cm / 5.03ft closed, 5 sections, 1350 g
  • 25ft: 174.5 cm / 5.73ft closed, 5 sections, 1532 g
  • 30ft: 177.0 cm / 5.81ft closed, 6 sections, 1918 g
  • Sections: rolled carbon fibre, sealed in epoxy resin
  • Base section: glass fibre and Kevlar, sealed in epoxy resin, dielectric tested to 30 kV AC under IEEE 516-2021
  • Clamp body and levers: moulded polyamide
  • Cam shims: spring loaded, self lubricating plastic
  • Grip shims: replaceable, softer than the section resin
  • Supplied with: threaded insert and base cap. Pole pipe is not included
  • Use with: pure water or mains water, 4°C to 60°C
  • Product codes: HI-CF-18, HI-CF-22, HI-CF-25, HI-CF-30

Delivery & Returns

Mainland UK: shipped via DPD next day service.

  • Free delivery: orders over £75 ex VAT qualify for free courier delivery.
  • Smaller items: sent via Royal Mail Tracked 48, 3 to 5 working days.
  • Oversized items: delivered by pallet within 2 to 4 working days; a signature is needed on delivery.
  • Returns: free 30 day returns. The returns policy has the details, and you can start a return through the DPD returns portal.
  • Same day dispatch available: orders placed before 3pm, Monday to Friday, are dispatched the same day at an additional cost. Select same day despatch at checkout.

Delivery times are not guaranteed, and Window Cleaning Warehouse cannot accept liability for items delivered to third party or unsecured addresses.

Safety

DANGER: do not use near overhead power lines or during thunderstorms. Contact with power lines may cause severe injury or death.

The base section is made from insulating glass fibre and Kevlar hybrid materials, dielectric tested to 30 kV AC under IEEE 516-2021, as an emergency secondary defence only. Never rely on it. Carry out a risk assessment for overhead power lines and electrical hazards before every job, and keep the pole well clear of them.

Guidance for window cleaners and overhead powerlines.

FaceLift® Horizon product data sheet.

Use the Horizon for:

  • Domestic and commercial window cleaning and valeting
  • Pure water or mains water between 4°C and 60°C
  • Calm weather, in areas clear of overhead cables
  • Vertical or angled cleaning pressure

Do not use it for:

  • Soft washing, chemical cleaning, high pressure or jet washing
  • Alkaline or acidic solutions, bleach or sodium hypochlorite, solvents or flammable liquids
  • Hot water above 70°C, or freezing conditions below 0°C
  • High winds, storms or any risk of lightning
  • Pulling sideways, bending, or as a lever or support

CODE: HI-CF-18

FaceLift® Horizon Carbon Water Fed Pole

  • Lower cost carbon fibre pole, with sections in Phantom diameters
  • Orbital style lever clamps with replaceable grip shims
  • Insulated glass fibre and Kevlar base section, tested to 30 kV AC
  • 18ft, 22ft, 25ft and 30ft, with threaded insert and base cap

£195.00

£234.00

£195.00

Promo Available

Add To Cart To Unlock Free Shipping

Promo Available

Add To Cart To Unlock Free Shipping

Description

New from FaceLift®

The FaceLift® Horizon Carbon is a budget friendly carbon fibre water fed pole. It keeps rolled carbon fibre sections in Phantom diameters and uses simpler Orbital style lever clamps, which is where the saving comes from.

Carbon fibre sections. Rolled carbon fibre sealed in epoxy resin. The pole stays stiff at reach and light in the hand.

Clamps that stay seated. Each clamp sits on a lip and groove at the top of its section, and a notch stops it turning while you work. A clamp that cannot twist does not wear the carbon underneath it.

Replaceable grip shims. The clamps have hooked levers, a polyamide body and spring loaded shims on the cam. The grip shims are softer than the epoxy on the sections, so the shim wears and the pole does not. When they are worn, you replace the shims.

Insulated base section. The base section is glass fibre and Kevlar, dielectric tested to 30 kV AC under IEEE 516-2021. Every production batch is tested in house and verified by a third party. It is an emergency secondary defence only. Never use any pole near overhead power lines.

Each pole comes with a threaded insert in the top clamp, which takes your angle neck and brush, and a base cap. Pole pipe, brush head and hose connector are sold separately, and you can add them from the options on this page.

The Horizon Carbon comes in 18ft, 22ft, 25ft and 30ft, for window cleaning and valeting with pure water. If the budget is tighter, the FaceLift® Horizon Hybrid has the same clamps and base section with glass fibre and carbon hybrid sections.

Product Specifications

  • Extended lengths: 18ft, 22ft, 25ft, 30ft
  • 18ft: 150.6 cm / 4.94ft closed, 4 sections, 1044 g
  • 22ft: 153.3 cm / 5.03ft closed, 5 sections, 1350 g
  • 25ft: 174.5 cm / 5.73ft closed, 5 sections, 1532 g
  • 30ft: 177.0 cm / 5.81ft closed, 6 sections, 1918 g
  • Sections: rolled carbon fibre, sealed in epoxy resin
  • Base section: glass fibre and Kevlar, sealed in epoxy resin, dielectric tested to 30 kV AC under IEEE 516-2021
  • Clamp body and levers: moulded polyamide
  • Cam shims: spring loaded, self lubricating plastic
  • Grip shims: replaceable, softer than the section resin
  • Supplied with: threaded insert and base cap. Pole pipe is not included
  • Use with: pure water or mains water, 4°C to 60°C
  • Product codes: HI-CF-18, HI-CF-22, HI-CF-25, HI-CF-30

Delivery & Returns

Mainland UK: shipped via DPD next day service.

  • Free delivery: orders over £75 ex VAT qualify for free courier delivery.
  • Smaller items: sent via Royal Mail Tracked 48, 3 to 5 working days.
  • Oversized items: delivered by pallet within 2 to 4 working days; a signature is needed on delivery.
  • Returns: free 30 day returns. The returns policy has the details, and you can start a return through the DPD returns portal.
  • Same day dispatch available: orders placed before 3pm, Monday to Friday, are dispatched the same day at an additional cost. Select same day despatch at checkout.

Delivery times are not guaranteed, and Window Cleaning Warehouse cannot accept liability for items delivered to third party or unsecured addresses.

Safety

DANGER: do not use near overhead power lines or during thunderstorms. Contact with power lines may cause severe injury or death.

The base section is made from insulating glass fibre and Kevlar hybrid materials, dielectric tested to 30 kV AC under IEEE 516-2021, as an emergency secondary defence only. Never rely on it. Carry out a risk assessment for overhead power lines and electrical hazards before every job, and keep the pole well clear of them.

Guidance for window cleaners and overhead powerlines.

FaceLift® Horizon product data sheet.

Use the Horizon for:

  • Domestic and commercial window cleaning and valeting
  • Pure water or mains water between 4°C and 60°C
  • Calm weather, in areas clear of overhead cables
  • Vertical or angled cleaning pressure

Do not use it for:

  • Soft washing, chemical cleaning, high pressure or jet washing
  • Alkaline or acidic solutions, bleach or sodium hypochlorite, solvents or flammable liquids
  • Hot water above 70°C, or freezing conditions below 0°C
  • High winds, storms or any risk of lightning
  • Pulling sideways, bending, or as a lever or support

WHAT'S INCLUDED?

FaceLift® Horizon Carbon pole

Rolled carbon fibre sections in the length you choose: 18ft, 22ft, 25ft or 30ft.

Threaded insert

Fitted in the top clamp. Your angle neck and brush screw onto it.

Lever clamps with grip shims

One clamp per section, each with a replaceable grip shim that locks onto the lip and groove.

Base cap

A three pronged base cap on the insulated base section.

KEY BENEFITS

Rolled carbon fibre sections
Rolled carbon fibre sections
Clamps lock onto a lip and groove
Clamps lock onto a lip and groove
Replaceable grip shims protect the sections
Replaceable grip shims protect the sections
Insulated base tested to 30 kV AC
Insulated base tested to 30 kV AC

WHY THIS PRODUCT?

Carbon fibre at a lower cost

Rolled carbon fibre sections in Phantom diameters, held by simpler Orbital style lever clamps, which keeps the price budget friendly.

Clamps that stay seated

Each clamp sits on a lip and groove at the top of its section, so it stays firmly in place.

No clamp rotation

A notch in the top of each section stops the clamp turning in use, which is what wears a section under its clamp.

Shims take the wear

The grip shims are softer than the epoxy on the sections and can be replaced when worn.

Insulated base section

Glass fibre and Kevlar, dielectric tested to 30 kV AC as an emergency secondary defence only. Never work near power lines.

Every batch tested

Each production batch of base sections is tested in house and verified by a third party.

Product Specifications

EXTENDED LENGTHCLOSED LENGTHSECTIONSWEIGHTCODE
18ft150.6 cm / 4.94ft41044 gHI-CF-18
22ft153.3 cm / 5.03ft51350 gHI-CF-22
25ft174.5 cm / 5.73ft51532 gHI-CF-25
30ft177.0 cm / 5.81ft61918 gHI-CF-30

RECENTLY ASKED QUESTIONS

What is the difference between the Horizon Carbon and the Horizon Hybrid?

The sections. The Horizon Carbon uses rolled carbon fibre, which is the stiffer and lighter of the two materials. The FaceLift® Horizon Hybrid uses layers of glass fibre and carbon, which costs less. The clamps and the insulated base section are the same on both, so the choice comes down to how much reach you work at and how many hours a day the pole is in your hands.

How is the Horizon different from the Orbital?

The Horizon has round sections and the Orbital has oval ones. The oval shape of the FaceLift® Orbital Carbon stops the sections spinning and gives a different grip. The Horizon uses the same style of lever clamp on round sections in Phantom diameters, and adds an insulated glass fibre and Kevlar base section.

Are Horizon sections interchangeable with Phantom sections?

No. The diameters match the FaceLift® Phantom Carbon, but Horizon sections have a lip and groove at the top that the clamp locks onto, and Phantom sections do not. Keep Horizon sections with Horizon clamps.

Can I fit a Horizon clamp to a Phantom section?

It will fit, but we do not recommend it. A Horizon clamp relies on the lip and groove on a Horizon section to stay seated. A Phantom section has no groove, so the clamp may slide off in use.

Is the Horizon safe to use near power lines?

No. No pole is. The glass fibre and Kevlar base section is dielectric tested to 30 kV AC, but it is an emergency secondary defence only and the sections above it are carbon, which conducts electricity. Check every job for overhead cables before you extend the pole, and stay well clear of them.

Can I use the Horizon for soft washing or with hot water?

No to soft washing. The Horizon is for pure water or mains water only, so keep bleach, sodium hypochlorite, acids, alkalis and solvents away from it. Water between 4°C and 60°C is fine. Do not use it with water above 70°C or in freezing conditions.

How do the clamps protect the pole sections?

In two ways. The grip shims inside each clamp are softer than the epoxy resin on the sections, so the shim takes the wear and can be replaced. Each clamp also locks onto a lip and groove with a notch that stops it rotating, which is the movement that normally scuffs a section under its clamp.

Does the Horizon come with pole pipe?

No. Each pole comes with a threaded insert and a base cap fitted, ready for your own angle neck, brush and hose. Pole pipe is sold separately, as it is on every pole we sell, because the length you need depends on your set up. You can add FaceLift® 5mm Pole Pipe from the options on this page, along with a brush head and hose connector.